Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS XL037 (AL) Z=029
Item No.
XA37029
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Fastening Type: | Pilot Bore |
| Number of teeth: | 29 |
| Flange: | Yes |
| Material: | Aluminium |
| Net Weight (Kg): | 0.086 |
RAW EDGE V-BELTS CX 100 DEV. 2540
Item No.
CX100
MULTIBAND V-BELTS 8V 3150 RIB 4
Item No.
MB8V31504
STD TOOTHED BARS ST-10 Z=016 UL=160
Item No.
BST1016
VARIATOR BELTS 37X10 DEV. 1700
Item No.
1700VR37X10
