Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 8M-30 Z=030
Item No.
08M3030
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 30 |
| Fastening Type: | Pilot Bore |
| Number of teeth: | 30 |
| Flange: | Yes |
| Material: | Blacksteel |
| Net Weight (Kg): | 1.32 |
WORM GEARBOX: VP 050 P R15 80B5 U
Item No.
VP05015P07
SIMPLEX C/IRON TAPER BORED SPR. 1/2X5/16 Z=114
Item No.
GS09114
SX HARDENED TL-SPROCKETS 5/8X3/8 Z=021
Item No.
TS10T21
HALF-COUPLING W. PILOT BORE HRC130
Item No.
HRCP130
