Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 5M-25 Z=040
Item No.
05M2540
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 25 |
| Fastening Type: | Pilot Bore |
| Number of teeth: | 40 |
| Flange: | Yes |
| Material: | Blacksteel |
| Net Weight (Kg): | 0.74 |
DUPLEX SPR. W. HARD.TEETH 1"1/4X3/4 Z=015
Item No.
PD13T15
SLIDING GUIDES 20X15X3 Mt
Item No.
SGB1HVG
V-BELT PULLEY W. SOLID HUB SPC 250-3
Item No.
CM02503
DUPLEX PLATE WHEELS 1/2X5/16 Z=017
Item No.
CD09017
