TIMING BELT PULLEYS HTD 3M-06 Z=072
Item No.
03M0672
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 6 |
Fastening Type: | Pilot Bore |
Number of teeth: | 72 |
Flange: | No |
Material: | Aluminium |
Net Weight (Kg): | 0.1 |
DUPLEX TAPER-B. SPROCKETS 5/8X3/8 Z=020
Item No.
TD10020
WORM GEARBOX: VP 110 P R30 100/112B14 B3 B
Item No.
VP11030B12
SX HARDENED TL-SPROCKETS 5/8X3/8 Z=015
Item No.
TS10T15
SIMPLEX SPR. W. HARD.TEETH 3/4X7/16 Z=008
Item No.
PS11T08