Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 3M-06 Z=018
Item No.
03M0618
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 6 |
| Fastening Type: | Centre Tip |
| Number of teeth: | 18 |
| Flange: | Yes |
| Material: | Aluminium |
| Net Weight (Kg): | 0.05 |
INCHES TAPER BUSHES 2517 BOR. 1"3/4
Item No.
2510134
METRIC P. TIMING BELT AT10-1000 W.16
Item No.
16AT101000
TENSIONER DEV. IN PLASTIC WITH REINFOR. PX 40-R
Item No.
RE010941
TIMING BELTS 2592 MXL 037 DEV.658,368 Z=324
Item No.
2592MXL037
