Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 3M-06 Z=018
Item No.
03M0618
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 6 |
| Fastening Type: | Centre Tip |
| Number of teeth: | 18 |
| Flange: | Yes |
| Material: | Aluminium |
| Net Weight (Kg): | 0.05 |
DUPLEX PLATEW.FOR TWO SINGLE CH. 1"X17,02 Z=017
Item No.
DS12017
RAW EDGE V-BELTS XPB 1470
Item No.
XPB1470
SIMPLEX SPROCKETS 1/2X1/8 Z=024
Item No.
PS06024
METRIC P. TIMING BELT AT10-1150 W.32
Item No.
32AT101150
