Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 14M-40 Z=168
Item No.
14M4016
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 40 |
| Fastening Type: | Pilot Bore |
| Number of teeth: | 168 |
| Flange: | No |
| Material: | Cast iron phosph |
| Net Weight (Kg): | 44.2 |
HTD TIMING BELTS 153 3M 03 Z=51
Item No.
1533M03
V-BELT PULLEY F. TAPER B. SPA100-06
Item No.
AT01006
HALF-COUPLING W. LARGE TAPE END HRC180 2517
Item No.
HRCE180
WORM GEARBOX: VTS 086 P R20 F19 B3
Item No.
VTS08620F19
