TIMING BELT PULLEYS HTD 14M-40 Z=072
Item No.
14M4072
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Belt Width (mm): | 40 |
Fastening Type: | Pilot Bore |
Number of teeth: | 72 |
Flange: | No |
Material: | Cast iron phosph |
Net Weight (Kg): | 16.9 |
WORM GEARBOX: VP 063 P R10 80B5 U
Item No.
VP06310P07
DUPLEX PLATEW.FOR TWO SINGLE CH. 10B1 (TL) Z=025
Item No.
DT10025
TIMING BELTS 240 H 075 DEV.609,6 Z=48
Item No.
240H075
SIMPLEX TAPER-B. SPROCKETS 3/4X7/16 Z=018
Item No.
TS11018