Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS H150 Z=020
Item No.
H150020
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Fastening Type: | Pilot Bore |
| Number of teeth: | 20 |
| Flange: | Yes |
| Material: | Blacksteel |
| Net Weight (Kg): | 1.66 |
DUPLEX TAPER-B. SPROCKETS 1"1/4X3/4 Z=015
Item No.
TD13015
HALF-COUPLING W. PILOT BORE HRC280
Item No.
HRCP280
TRIPLEX SPROCKETS 3/4X7/16 Z=026
Item No.
PT11026
LOCKING SETS SERIE DA 30/55
Item No.
KLDA030
