Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS H075 Z=040
Item No.
H075040
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Fastening Type: | Pilot Bore |
| Number of teeth: | 40 |
| Flange: | Yes |
| Material: | Blacksteel |
| Net Weight (Kg): | 4.23 |
HALF-COUPLING W. LARGE TAPE END HRC110 1610
Item No.
HRCE110
DUPLEX C/IRON TAPER BORED SPR. 5/8X3/8 Z=076
Item No.
GD10076
WORM GEARBOX: VI 050 P R40 U
Item No.
VI05040S01
TIMING BELTS 1224 MXL 037 DEV.310,896 Z=153
Item No.
1224MXL037
