Deutsch
Español
Français
Italiano
MULTIBAND V-BELTS SPC 8500 RIB 7
Item No.
MBSPC85007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Number of bands: | 7 |
| Type: | Multiband |
| Length (mm): | 8.500 |
| Material: | Rubber |
| Net Weight (Kg): | N.A. |
V-BELT PULLEY F. TAPER B. SPC250-10
Item No.
CT0250X
INCHES TAPER BUSHES 1008 BOR. 3/8
Item No.
1000038
DUPLEX PLATE WHEELS ASA 40 Z=045
Item No.
CD09A45
SIMPLEX PLATE WHEELS 1"X17,02 Z=120
Item No.
CS12120
