MULTIBAND V-BELTS SPC 8000 RIB 4
Item No.
MBSPC80004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 4 |
Type: | Multiband |
Length (mm): | 8.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
TIMING SLEEVES 1080MXL Z 135
Item No.
MA1080MXL
TIMING PULLEYS TAPER POLYCHAIN GT 8M-36 Z=34
Item No.
0836034
DUPLEX SPROCKETS 5/8X3/8 Z=036
Item No.
PD10036
TRIPLEX C/IRON TAPER BORED SPR. 1"X17,02 Z=038
Item No.
GT12038