MULTIBAND V-BELTS SPC 7100 RIB 8
Item No.
MBSPC71008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 8 |
Type: | Multiband |
Length (mm): | 7.100 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
ADJUSTABLE PULLEYS PV 177 S."A" G. 2
Item No.
PVA1772
DUPLEX SPROCKETS 1"1/4X3/4 Z=076
Item No.
PD13076
ADJUSTABLE PULLEYS PV 146 S."A" G. 2
Item No.
PVA1462
SPUR GEARS WITH HUB MOD. 4 Z=060
Item No.
PM31060