MULTIBAND V-BELTS SPC 6300 RIB 8
Item No.
MBSPC63008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 8 |
Type: | Multiband |
Length (mm): | 6.300 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
RAW EDGE V-BELTS CX 72 DEV. 1826
Item No.
CX72
RAW EDGE V-BELTS CX 51 DEV. 1295
Item No.
CX51
HTD TIMING BELTS 159 3M 12 Z=53
Item No.
1593M12
HTD TIMING BELTS 156 3M 12 Z=52
Item No.
1563M12