MULTIBAND V-BELTS SPC 6300 RIB 7
Item No.
MBSPC63007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 7 |
Type: | Multiband |
Length (mm): | 6.300 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
DUPLEX SPROCKETS 1"1/2X1" Z=030
Item No.
PD14030
STD TOOTHED BARS ST-10 Z=018 UL=160
Item No.
BST1018
SIMPLEX SPROCKETS 3/8X7/32 Z=011
Item No.
05SA611
SIMPLEX SPROCKETS 3/8X7/32 Z=021
Item No.
05SA821