MULTIBAND V-BELTS SPC 6300 RIB 4
Item No.
MBSPC63004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 4 |
Type: | Multiband |
Length (mm): | 6.300 |
Material: | Rubber |
Net Weight (Kg): | 11.5 |
DUPLEX TAPER-B. SPROCKETS 3/4X7/16 Z=016
Item No.
TD11016
TRIPLEX CAST IRON C. WHEELS 1"1/2X1" Z=057
Item No.
RT14057
BALL BEAR. IDLER SPROCKETS 3/4X7/16 Z=015
Item No.
PC11015
Spur gears with hardened teeth mod. 2 Z=024
Item No.
PM28T24