Deutsch
Español
Français
Italiano
MULTIBAND V-BELTS SPC 6300 RIB 4
Item No.
MBSPC63004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Number of bands: | 4 |
| Type: | Multiband |
| Length (mm): | 6.300 |
| Material: | Rubber |
| Net Weight (Kg): | 11.5 |
MULTIBAND V-BELTS SPB 7100 RIB 3
Item No.
MBSPB71003
MULTIBAND V-BELTS SPC 6000 RIB 3
Item No.
MBSPC60003
WORM GEARBOX: VES 049 P R36 U
Item No.
VES04936S01
MULTIBAND V-BELTS SPC 5600 RIB 5
Item No.
MBSPC56005
