MULTIBAND V-BELTS SPC 6000 RIB 4
Item No.
MBSPC60004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 4 |
Type: | Multiband |
Length (mm): | 6.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
TIMING BELT PULLEYS H075 Z=018
Item No.
H075018
HTD TIMING BELTS 2400 8M 20 Z=300
Item No.
24008M20
HTD TIMING BELTS 1190 14M 85 Z=85
Item No.
119014M85