Deutsch
Español
Français
Italiano
HTD TIMING BELTS 2400 8M 20 Z=300
Item No.
24008M20
• Available in metric size 3M, 5M, 8M, 14M. 2M and 20M on demand • A hard wearing, flexible top surface protect tension cables • Tension cables made in continuous helically glass fiber • Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the
Description
• Available in metric size 3M, 5M, 8M, 14M. 2M and 20M on demand
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber
• Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• In line with ISO 5296 norm
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber
• Protective cover fabric with a low coefficient of friction,in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• In line with ISO 5296 norm
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Type: | Timing Belt HTD |
| Width (mm): | 20 |
| Number of teeth: | 300 |
| Length (mm): | 2.400 |
| Material: | Rubber |
| Net Weight (Kg): | 0.3072 |
TIMING BELTS IN METER 5M W. 15
Item No.
CM5M15
TRIPLEX C/IRON TAPER BORED SPR. 3/4X7/16 Z=114
Item No.
GT11114
SIMPLEX CHAINS 1/2X3/16-084 HEAVY
Item No.
084H1
DUPLEX PLATEW.FOR TWO SINGLE CH. 16B1 (TL) Z=013
Item No.
DT12013
