Deutsch
Español
Français
Italiano
MULTIBAND V-BELTS SPC 5000 RIB 4
Item No.
MBSPC50004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Number of bands: | 4 |
| Type: | Multiband |
| Length (mm): | 5.000 |
| Material: | Rubber |
| Net Weight (Kg): | 7.2 |
LOCKING SETS SERIE FC 16/25
Item No.
KLFC016
LOCKING SETS SERIE BB 19/55
Item No.
KLBB119
TIMING BELTS 390 H 100 DEV.990,6 Z=78
Item No.
390H100
BEVEL GEAR PAIRS M. 1-B Z=30/30
Item No.
C26B301
