MULTIBAND V-BELTS SPB 7100 RIB 7
Item No.
MBSPB71007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 7 |
Type: | Multiband |
Length (mm): | 7.100 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
RAW EDGE V-BELTS XPB 1470
Item No.
XPB1470
TRIPLEX SPROCKETS 5/8X3/8 Z=009
Item No.
PT10009
SIMPLEX SPROCKETS 5/8X3/8 Z=054
Item No.
PS10054
DOUBLE V-BELTS BB 100
Item No.
BB100