MULTIBAND V-BELTS SPB 6000 RIB 3
Item No.
MBSPB60003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 6.000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
CAST IRON SEMI-COUPLING HUB "A" 28
Item No.
SGMA028
SIMPLEX SPROCKETS 5/8X3/8 Z=015
Item No.
10SA915
V-PULLEYS FOR LOCKING SET SPA 225/1 B.65
Item No.
AK0225165
TIMING B. PULLEYS TAPER B. HTD 8M-30 Z=022
Item No.
0830022