Deutsch
Español
Français
Italiano
MULTIBAND V-BELTS SPB 4500 RIB 4
Item No.
MBSPB45004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Number of bands: | 4 |
| Type: | Multiband |
| Length (mm): | 4.500 |
| Material: | Rubber |
| Net Weight (Kg): | 7 |
MULTIBAND V-BELTS SPC 8500 RIB 2
Item No.
MBSPC85002
DUPLEX SPROCKETS 8X3 Z=012
Item No.
PD04012
V-BELT PULLEY F. TAPER B. SPA355-06
Item No.
AT03556
MULTIBAND V-BELTS SPB 4250 RIB 4
Item No.
MBSPB42504
