Deutsch
Español
Français
Italiano
MULTIBAND V-BELTS SPB 4500 RIB 2
Item No.
MBSPB45002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Number of bands: | 2 |
| Type: | Multiband |
| Length (mm): | 4.500 |
| Material: | Rubber |
| Net Weight (Kg): | N.A. |
HTD TIMING BELTS 186 3M 15 Z=62
Item No.
1863M15
CAP HEAD SCREW B.S.W. 3/4" X 2"
Item No.
VB34X2
HTD TIMING BELTS 186 3M 12 Z=62
Item No.
1863M12
MULTIBAND V-BELTS SPB 4370 RIB 2
Item No.
MBSPB43702
