MULTIBAND V-BELTS SPB 2500 RIB 6
Item No.
MBSPB25006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 6 |
Type: | Multiband |
Length (mm): | 2.500 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
DUPLEX TAPER-B. SPROCKETS 5/8X3/8 Z=022
Item No.
TD10022
TIMING SLEEVES 513-3M Z 171
Item No.
MA5133M
SIMPLEX CONNECTING LINKS STAINL.STEEL 3/8 ASA35
Item No.
06XA1G
BEVEL GEAR PAIRS M. 3-A Z=25/25
Item No.
C30A251