MULTIBAND V-BELTS SPB 2240 RIB 3
Item No.
MBSPB22403
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 2.240 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
SIMPLEX SPROCKETS 5/8X3/8 Z=020
Item No.
10SC220
DUPLEX C/IRON TAPER BORED SPR. 3/4X7/16 Z=045
Item No.
GD11045
TRIPLEX SPROCKETS 3/8X7/32 Z=022
Item No.
PT05022
RAW EDGE V-BELTS BX 86 DEV. 2185
Item No.
BX86