Deutsch
Español
Français
Italiano
MULTIBAND V-BELTS B 134 RIB 7
Item No.
MBB1347
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Number of bands: | 7 |
| Type: | Multiband |
| Lenght (inches): | 134 |
| Material: | Rubber |
| Net Weight (Kg): | N.A. |
V-BELT PULLEY F. TAPER B. SPA190-02
Item No.
AT01902
TIMING BELT PULLEYS HTD 8M-20 Z=072
Item No.
08M2072
TIMING BELT PULLEYS HTD 8M-30 Z=080
Item No.
08M3080
TIMING BELT PULLEYS HTD 8M-30 Z=192
Item No.
08M3019
