MULTIBAND V-BELTS SPC 8500 RIB 7
Item No.
MBSPC85007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 7 |
Type: | Multiband |
Length (mm): | 8.500 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
SIMPLEX SPROCKETS 1/2X1/4X7,75 Z 10
Item No.
PS08010
DUPLEX C/IRON TAPER BORED SPR. 3/4X7/16 Z=057
Item No.
GD11057
WORM GEARBOX: VP 030 P R15 63B14 U
Item No.
VP03015P04
BEVEL GEAR PAIRS M. 1,5-A Z=20/20
Item No.
C27A201