MULTIBAND V-BELTS SPB 2240 RIB 3
Item No.
MBSPB22403
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Length (mm): | 2.240 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
TIMING B. PULLEYS TAPER B. H200 Z=040
Item No.
TH20040
CLASSIC V-BELTS E 456 DEV. 11582
Item No.
11582E456
V-PULLEYS FOR LOCKING SET SPB 125/5 B.55
Item No.
BK0125555
DUPLEX SPROCKETS 1"1/4X3/4 Z=026
Item No.
PD13026