COURROIES MULTIBAND SPB 2500 RIB 8
Code article
MBSPB25008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Remarque : la Photo à côté est à titre uniquement indicatif. Toutes les spécifications techniques sont fournies par le Catalogue General Sati
Spécifications
Bande: | 8 |
Type: | Multiband |
Développement (mm): | 2.500 |
Matière: | Caoutchouc |
Poids Net (Kg): | N.D. |
COURROIES DE VARIATEUR 37X10 C. 1600
Code article
1600VR37X10
MANCHONS DENTES AT10-1010 W. 300
Code article
MAT101010
COURROIES DE VARIATEUR 37X10 C. 1400
Code article
1400VR37X10
PIGNONS SIMPLES 1/2X5/16 Z=016
Code article
09SC216