COURROIES MULTIBAND SPB 2240 RIB 2
Code article
MBSPB22402
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Remarque : la Photo à côté est à titre uniquement indicatif. Toutes les spécifications techniques sont fournies par le Catalogue General Sati
Spécifications
Bande: | 2 |
Type: | Multiband |
Développement (mm): | 2.240 |
Matière: | Caoutchouc |
Poids Net (Kg): | N.D. |
DEMI-ACCOUPLEMENT MOYEU "A" 55
Code article
SGMA055
P.MOYEU AMOV.TREMP. SX 3/8X7/32 Z=027
Code article
TS05T27
PIGNONS DOUBLES/SIMPLES 12B1 (TL) Z=014
Code article
DT11014
PIGN. DOUBLES AV.DENT.TREMP. 1/2X5/16 Z=025
Code article
PD09T25