MANGUITOS PASO METRICO T2.5-200 W.130
Artículo
MT25200
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Manguito dentado paso metrico |
Ancho (mm): | 150 |
Dientes: | 80 |
Desarrollo (mm): | 200 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
MOTOR ELÉCTR. IE3 355MB 4P 250KW 400/690V B3
Artículo
C33552504B3
POLEAS DENTADAS XL037 (AL) Z=012
Artículo
XA37012
PINONES EN ACERO INOX 5/8X3/8 Z=026
Artículo
PS10X26
ELEMENTO ELASTICO ROJO 19/24
Artículo
ER19024