MANGUITOS PASO METRICO AT10-500 W. 300
Artículo
MAT10500
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Manguito dentado paso metrico |
Ancho (mm): | 300 |
Dientes: | 50 |
Desarrollo (mm): | 500 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
RUEDA CILINDRICA CON CUBO MOD. 2,5 Z=012
Artículo
PM29012
PINONES DOBLES 5/8X3/8 Z=017
Artículo
PD10017
CORREAS DENTADAS 1888 MXL 031 DES. 479,552 Z=236
Artículo
1888MXL031
SEMI-ACOPLAM.DENT. CUBO CORTO "55"
Artículo
SG0C055