MANGUITOS PASO METRICO AT10-1280 W. 300
Artículo
MAT101280
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Manguito dentado paso metrico |
Ancho (mm): | 300 |
Dientes: | 128 |
Desarrollo (mm): | 1.280 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
DISCOS SIMPLES 1/2X5/16 Z=015
Artículo
CS09015
POLEAS DENT. P. CASQ.CON. L050 Z=021
Artículo
TL50021
PINONES SIMPLES 1/2X5/16 Z=019
Artículo
09SC519
CORREAS TRAP. DENTADAS BX 57 DES. 1450
Artículo
BX57