MANGUITOS PASO METRICO AT10-1250 W. 300
Artículo
MAT101250
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Manguito dentado paso metrico |
Ancho (mm): | 300 |
Dientes: | 125 |
Desarrollo (mm): | 1.250 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS H100 Z=060
Artículo
H100060
CORREAS ACANALADAS 1041 J PULG. 41 NERV. 10
Artículo
1041J10
FLAT BELTS LP. 500 (mm.)
Artículo
CP500
POLEAS DENTADAS MXL 025 Z=020
Artículo
MXL2520