CORREAS PASO METRICO T5-475 A. 20
Artículo
20T5475
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 20 |
Dientes: | 95 |
Desarrollo (mm): | 475 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
RUEDA EN FUNDICION TRIPLE 1"1/2X1" Z=076
Artículo
RT14076
DISCOS SIMPLES 3/8X7/32 Z=014
Artículo
CS05014
CORREAS DENTADAS 900 H 075 DES. 2286 Z=180
Artículo
900H075
MOTOR ELÉCTR. IE3 355MA 6P 160KW 400/690V B3
Artículo
C33551606B3