CORREAS PASO METRICO T5-165 A. 10
Artículo
10T5165
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 10 |
Dientes: | 33 |
Desarrollo (mm): | 165 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
MOTOR ELÉCTR. IE1 225M 4P 45KW 400/690V B5
Artículo
C122545X4B5
CORREAS DENT.DOBLE DENTADO HTD 1120 8M 30 Z=140
Artículo
DD11208M30
POLEAS DENTADAS XL037 (AL) Z=017
Artículo
XA37017
PARES CONICOS M. 1,5-B Z=26/26
Artículo
C27B261