CORREAS PASO METRICO T5-1075 A. 16
Artículo
16T51075
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 215 |
Desarrollo (mm): | 1.075 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS 976 MXL 037 DES. 247,904 Z=122
Artículo
976MXL037
CORREAS DENTADAS 80 XL 025 DES. 203,2 Z=40
Artículo
80XL025
PINONES EN ACERO INOX 1/2X5/16 Z=020
Artículo
PS09X20
CORREAS DENTADAS 1472 MXL 031 DES. 373,888 Z=184
Artículo
1472MXL031