CORREAS PASO METRICO T5-1000 A. 20
Artículo
20T51000
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 20 |
Dientes: | 200 |
Desarrollo (mm): | 1.000 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS L075 Z=120
Artículo
L075120
CORREAS TRAP. CLASICAS Z 40 DES. 1016
Artículo
1016Z40
PINONES CASQ.CONIC.SIMPLES 5/8X3/8 Z=057
Artículo
TS10057
REDUCTOR TSF: VP 040 P R80 63B14 U
Artículo
VP04080P04