CORREAS PASO METRICO T2.5-915 A. 08
Artículo
08T25915
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 8 |
Dientes: | 366 |
Desarrollo (mm): | 915 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
DISCOS SIMPLES 3/8X7/32 Z=063
Artículo
CS05063
POLEAS TRAP. CASQ.CONICOS SPB315-06
Artículo
BT03156
REDUCTOR TSF: VTS 086 P R15 F19 B3
Artículo
VTS08615F19
POLEAS DENTADAS ST10-31 Z=018
Artículo
31ST118