CORREAS PASO METRICO T2.5-915 A. 08
Artículo
08T25915
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 8 |
Dientes: | 366 |
Desarrollo (mm): | 915 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. ESTRECHAS 5V 1400 DES. 3555
Artículo
5V1400
PINONES CASQ.CONIC.TRIPLES 1/2X5/16 Z=025
Artículo
TT09025
RUEDA EN FUND. SIMPLE P.CASQ.CON. 5/8X3/8 Z=095
Artículo
GS10095
CORREAS DENTADAS HTD 1125 3M 15 Z=375
Artículo
11253M15