CORREAS PASO METRICO T2.5-342,5 A. 08
Artículo
08T253425
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 8 |
Dientes: | 137 |
Desarrollo (mm): | 342,5 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
PINONES DOBLES 3/8X7/32 Z=013
Artículo
PD05013
CREM. MONTAJE CONTINUO M.3 30X30X1000
Artículo
CR30100
SEMI-ACOPLAM.DENT. CUBO CORTO "14"
Artículo
SG0C014
DISCOS SIMPLES 5X2,5 Z=052
Artículo
CS01052