CORREAS PASO METRICO T2.5-210 A. 06
Artículo
06T25210
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 6 |
Dientes: | 84 |
Desarrollo (mm): | 210 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
PINONES DOBLES 1"1/2X1" Z=015
Artículo
PD14015
CORREAS DENTADAS HTD 1000 5M 15 Z=200
Artículo
10005M15
PINONES CASQ.CONIC.DOBLES 3/4X7/16 Z=025
Artículo
TD11025
CORREAS CON DOBLE DENT. 660 H 200 DES.1676,4 Z=132
Artículo
DD660H200