CORREAS PASO METRICO T10-2250 A. 16
Artículo
16T102250
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 225 |
Desarrollo (mm): | 2.250 |
Material: | poliuretano |
Peso Neto (Kg): | 0,153 |
PINONES DOBLES 8X3 Z=008
Artículo
PD04008
CORREAS DENTADAS HTD 584 8M 50 Z=73
Artículo
5848M50
REDUCTOR TSF: VP 050 P R100 63B14 U
Artículo
VP050X1P04
PINONES SIMPLES 3/8X7/32 Z=010
Artículo
05SA010