CORREAS PASO METRICO T10-1110 A. 32
Artículo
32T101110
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 111 |
Desarrollo (mm): | 1.110 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS H200 Z=014
Artículo
H200014
DISCOS SIMPLES 1"1/4X3/4 Z=076
Artículo
CS13076
PARES CONICOS M. 1-B Z=16/24
Artículo
C26B240
REDUCTOR TSF: VTS 044 P R100 F11 U
Artículo
VTS044X1F11