CORREAS PASO METRICO AT5-610 A. 10
Artículo
10AT5610
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 10 |
Dientes: | 122 |
Desarrollo (mm): | 610 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
PINONES CASQ.CONIC.SIMPLES 1"X17,02 Z=030
Artículo
TS12030
CORREAS DENTADAS HTD 1000 8M 20 Z=125
Artículo
10008M20
CORREAS TRAP. ESTRECHAS 3V 1000 DES. 2540
Artículo
3V1000
PINONES SIMPLES ASA 40 Z=033
Artículo
PS09A33