CORREAS PASO METRICO AT5-2000 A. 16
Artículo
16AT52000
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 400 |
Desarrollo (mm): | 2.000 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES 5/8X3/8 Z=014
Artículo
10SB814
BRAZO TENSOR RE 20
Artículo
RE010020
CORREAS DENTADAS HTD 1245 3M 15 Z=415
Artículo
12453M15