CORREAS PASO METRICO AT5-1050 A. 10
Artículo
10AT51050
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 10 |
Dientes: | 210 |
Desarrollo (mm): | 1.050 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS HTD 14M-55 Z=192
Artículo
14M5519
MANGUITOS CON DOBLE DENT. 1400H Z 280
Artículo
MD1400H
POLEAS TRAP. CASQ.CONICOS SPZ100-04
Artículo
ZT01004
DISCOS SIMPLES 1/2X3/16 Z=048
Artículo
CS07048