CORREAS PASO METRICO AT10-610 A. 16
Artículo
16AT10610
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 16 |
Dientes: | 61 |
Desarrollo (mm): | 610 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. ESTRECHAS SPZ 2800 DES. 2813
Artículo
SPZ2800
CORREAS DENTADAS HTD 501 3M 15 Z=167
Artículo
5013M15
CORREAS DENTADAS 440 MXL 031 DES. 111,76 Z=55
Artículo
440MXL031
DISCOS SIMPLES 1/2X1/8 Z=031
Artículo
CS06031