CORREAS PASO METRICO AT10-1280 A. 50
Artículo
50AT101280
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 128 |
Desarrollo (mm): | 1.280 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CORREAS MULTIBAND SPC 8500 RIB 7
Artículo
MBSPC85007
PINONES SIMPLES 1"X17,02 Z=011
Artículo
12SD011
PINONES SIMPLES 3/8X7/32 Z=010
Artículo
05SA010